For
environmental applications
the DryVap™ Concentrator
System automates the drying,
evaporation and concentration
of organic extracts prior
to GC and GC/MS analysis.
Designed to emulate the traditional
Kuderna Danish (KD) method,
the DryVap™ Concentrator
System combines what were
once manual steps into one
automated process. Using a
unique combination of vacuum,
heat and sparge gas, the DryVap™
Concentrator System rapidly
evaporates and gently concentrates
extractions down to a precise
desired volume.
The superior analyte recovery
rate achieved by the system
delivers more accurate results
with greater consistency than
previous techniques. Unattended
operation not only frees up
laboratory personnel for other
tasks, it also eliminates
variability between chemists'
techniques. When equipped
with the DryDisk™ Separation
Membrane option, the DryVap™
Concentrator System can dry
and concentrate samples in
under 30 minutes -- increasing
the sample throughput of your
lab.
For biopharmacueutical, pharmaceutical
and other applications the
DryVap™ Concentrator
System removes residual solvents
from your compound in far
less time than traditional
evaporation methods. Through
the precise application of
vacuum, heat and nitrogen
sparge, the DryVap™ Concentrator
System gently and predictably
evaporates all residual solvent
from your compound so you
can quickly move on to the
next step.
Every
parameter in the DryVap™
Concentrator System can
be optimized and saved as
a method with the DryVap™
Concentrator System Control
Software option. This gives
you the ability to consistently
and precisely remove residual
solvent from your compound
of interest run after run.
A
variety of evaporation tubes
are available
to match your application.
.......................................................................................
200
mL Concentrator Tube, tapered
base with 1 mL tip and an
optical endpoint at 0.9
mL for sample concentration
Part No. 03-1588-04; Qty
1
(Standard tube included
with DryVap Concentrator
System)
.......................................................................................
200
mL Concentrator Tube, tapered
base with 0.5 mL tip and
an optical endpoint at 0.4
mL for sample concentration
Part No. 03-1588-05; Qty
1
NOTE: Select this tube when
objective is to add volume
to
mark then transfer contents
to a GC vial.
.......................................................................................
200
mL Concentrator Tube, tapered
base with 1 mL tip and an
optical endpoint at 1 mL
for sample concentration
Part No. 03-1588-01;
Qty 1
NOTE: Select this tube when
objective is to simply
transfer contents of tip
to a GC vial.
.......................................................................................
200
mL Concentrator Tube, tapered
base with 0.5 mL tip and
an optical endpoint at 0.5
mL for sample concentration
Part No. 03-1588-02; Qty
1
NOTE: Select this tube when
objective is to simply
transfer contents of tip
to a GC vial.
.......................................................................................
200
mL Evaporator Tube
with solid tip for removal
of residual solvent
Part No. 03-1588-03; Qty
1
NOTE:
Select this tube when objective
is to bring sample to dryness
or achieve an endpoint volume
that is greater than 1 mL.
.......................................................................................
200
mL Direct-to-Vial Concentrator
Tube
with
12 x 32 mm GC Vial Tips
for sample concentration
Kit includes:
x1 200 mL Concentrator Tube
with GC vial thread
x1 GC vial coupling for
12 x 32 mm GC vial
x1 Box of 100, 12 x 32 mm
GC vials and caps
x1 Cradle adapter for 12
x 32 mm vials
Part No. 49-2225
.......................................................................................
|
