For
environmental applications the DryVap™ Concentrator
System automates the drying, evaporation and concentration
of organic extracts prior to GC and GC/MS analysis.
Designed to emulate the traditional Kuderna Danish
(KD) method, the DryVap™ Concentrator System
combines what were once manual steps into one automated
process. Using a unique combination of vacuum, heat
and sparge gas, the DryVap™ Concentrator System
rapidly evaporates and gently concentrates extractions
down to a precise desired volume.
The superior analyte recovery rate achieved by the
system delivers more accurate results with greater
consistency than previous techniques. Unattended
operation not only frees up laboratory personnel
for other tasks, it also eliminates variability
between chemists' techniques. When equipped with
the DryDisk™ Separation Membrane option, the
DryVap™ Concentrator System can dry and concentrate
samples in under 30 minutes -- increasing the sample
throughput of your lab.
For biopharmacueutical, pharmaceutical and other
applications the DryVap™ Concentrator System
removes residual solvents from your compound in
far less time than traditional evaporation methods.
Through the precise application of vacuum, heat
and nitrogen sparge, the DryVap™ Concentrator
System gently and predictably evaporates all residual
solvent from your compound so you can quickly move
on to the next step.
Every
parameter in the DryVap™ Concentrator System
can be optimized and saved as a method with the
DryVap™ Concentrator System Control Software
option. This gives you the ability to consistently
and precisely remove residual solvent from your
compound of interest run after run.
A
variety of evaporation tubes are available
to match your application.
.......................................................................................
200
mL Concentrator Tube, tapered base with 1 mL tip
and an optical endpoint at 0.9 mL for sample concentration
Part No. 03-1588-04; Qty 1
(Standard tube included with DryVap Concentrator
System)
.......................................................................................
200
mL Concentrator Tube, tapered base with 0.5 mL
tip and an optical endpoint at 0.4 mL for sample
concentration
Part No. 03-1588-05; Qty 1
NOTE: Select this tube when objective is to add
volume to
mark then transfer contents to a GC vial.
.......................................................................................
200
mL Concentrator Tube, tapered base with 1 mL tip
and an optical endpoint at 1 mL for sample concentration
Part No. 03-1588-01; Qty 1
NOTE: Select this tube when objective is to simply
transfer contents of tip to a GC vial.
.......................................................................................
200
mL Concentrator Tube, tapered base with 0.5 mL
tip and an optical endpoint at 0.5 mL for sample
concentration
Part No. 03-1588-02; Qty 1
NOTE: Select this tube when objective is to simply
transfer contents of tip to a GC vial.
.......................................................................................
200
mL Evaporator Tube
with solid tip for removal of residual solvent
Part No. 03-1588-03; Qty 1
NOTE:
Select this tube when objective is to bring sample
to dryness or achieve an endpoint volume that
is greater than 1 mL.
.......................................................................................
200
mL Direct-to-Vial Concentrator Tube
with
12 x 32 mm GC Vial Tips
for sample concentration
Kit includes:
x1 200 mL Concentrator Tube with GC vial thread
x1 GC vial coupling for 12 x 32 mm GC vial
x1 Box of 100, 12 x 32 mm GC vials and caps
x1 Cradle adapter for 12 x 32 mm vials
Part No. 49-2225
.......................................................................................
|
